Beautiful Engineered Oak Floor installed in Dulwich

A rather technical project with many stages especially on the sub-floor preparation. The old thermoplastic tiles removed after which the screed needed to be grinded so a flat surface was obtained.
Posted on8 Years ago by

A rather technical project with many stages especially on the sub-floor preparation.The old thermoplastic tiles removed after which the screed needed to be grinded so a flat surface was obtained. Being a concrete ground floor a liquid DPM was mandatory for properly safeguarding the precious wooden floor for the decades to come.
After completing all the preparations the main stage followed, the more plesant part for us, fitting the wooden floor. We glued it down and since the sub-floor was thoroughly prepared the end result was a really solid floor, without resilience or hollow sound under.
We replaced the skirting as well using a minimal one to emphasise more the oak floor.

We could deliver this beautiful result with the exceptional quality wood provided by Natural Wood Floor Co. This was also our recommendation.

Wood boards: Engineered Oak Natural Pre-oiled OLNO/135
Boards Dimensions: Width 135mm, Thickness 20mm, Various Length up to 2900mm.
Location: Dulwich, London

Related articles
Related
(60)

Fitting engineered light boards: like the walls, a floor is a blank canvas and can set the design tone for the rest of the room. When choosing a light engineered flooring get inspired from your current ambiance as...
Quick view
(24)

Solid wood flooring London: there’s a unique elegance in a natural look solid wood floor. The beauty of natural wood lies in its infinite and peculiar variations in knots, grains and colour. Through these, once solid...
Quick view
(0)

Stauf SPU 460 Wood Flooring Adhesive: with  SPU-460  STAUF created a new product family which combines the well-proven safety of a one component PU adhesive with the health and safety benefits offered by silane...
Quick view
(0)

Sikabond T52 FC Elastic wood flooring adhesive: is a gun or trowel applied elastic wood flooring adhesive for use with any width board. It is also used in conjunction with silent layer mats as part of the AcouBond...
Quick view
(0)

Door trim reducer - solid Oak: this solid threshold is to be fitted where your floors are of different height. It is suitable for any wooden flooring, regardless of your floor being oiled or lacquered.
Quick view
(1)

Pipe Collars - solid Oak: are designed to be used around the edge of pipes which go into the floor to hide the expansion gap which is required when installing wooden flooring. Oak Pipe Cover is designed in two halves...
Quick view
(0)

Stair Nosing - solid Oak: the stair nosing is designed to finish off the area on the edge of a step or stair. It is suitable for any wooden flooring 15-18mm thick, regardless of your floor being oiled or lacquered....
Quick view
(0)

Wakol PU280 Polyurethane Primer: is for priming absorbent and non-absorbent subfloors, and to reinforce abraded concrete edges. Also for capillary ascending humidity and higher residual humidity up to 6 CM% in cement...
Quick view
(0)

Felt pads: Strong adhesive sticks to furniture feet to protect wood and hard floors from scratching and marking. Felt pads are available in different shapes and colours.
Quick view

Menu

QR code