Walnut Boards Natural Oiled Natural 19x180mm: This product is unsealed, giving you the opportunity to finish it as you like, using an oil to retain the warmer tones and characteristics of Walnut, or a lacquer to enhance the wood’s natural hues.
Walnut Boards Natural Oiled Natural 19x180mm: This product is unsealed, giving you the opportunity to finish it as you like, using an oil to retain the warmer tones and characteristics of Walnut, or a lacquer to enhance the wood’s natural hues.
Sourced from safely managed forests in Northern America, Walnut is a popular species that adds character to any room with its rich and luxurious appeal. Walnut is a beautiful dark and intense brown hardwood with a high-end look. This species is rich in detail and its warm tones are sure to bring a room to life.
Engineered wood floors are suitable for kitchens, bathrooms, utility rooms, and any other room in the house because of their greater stability and lower moisture level in the wood.
Our engineered Boards Woodblock has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for a fully bonded installation to a screed or ply subfloor, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.
Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1
Product code: WNU/180
Species: Walnut
Group: Flooring
Category: Engineered Flooring
Sub-Category: Engineered Board
Type of finish: Oiled – An additional coat is recommended.
Brushed: No
Profile: Natural
Weight: 14.3 kg
Recommended Use: per Square Metre
Pack Size: Yes
Dimensions: 180 × 19 mm
Width: 180 mm
Thickness: 19 mm
Colour : Dark
Under Floor Heating : Tongue and Groove
Unit Measurement : Bevelled Edge
Design : Wide Boards (150mm – 300mm), Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
Each wood flooring project is different so an individual approach is a must for us. We've created this cost calculator with this in mind and we hope it will be helpful to you in bringing some much-needed clarity.
Please fill in as many fields as possible with the most accurate and available information. This will increase the quality of the end result.
Please sign in first.
Sign in
