Oak Square Premier Unsealed 15x140x140mm
Oak Square Premier Unsealed 15x140x140mm: Transform your space with the timeless elegance of our Versailles Pattern Unsealed Engineered Hardwood Flooring. Designed to exude sophistication, this exquisite flooring features the intricate beauty of the Versailles design, where square panels are seamlessly combined with smaller rectangular pieces for a dynamic, luxurious look.
Oak Square Premier Unsealed 15x140x140mm
Oak Square Premier Unsealed 15x140x140mm: Transform your space with the timeless elegance of our Versailles Pattern Unsealed Engineered Hardwood Flooring. Designed to exude sophistication, this exquisite flooring features the intricate beauty of the Versailles design, where square panels are seamlessly combined with smaller rectangular pieces for a dynamic, luxurious look.
Crafted from high-quality, unsealed Engineered wood, the flooring showcases the natural grain and rich hues of the wood, allowing it to be finished in any style to fit the room. The unsealed finish gives it a raw, authentic charm that evolves with every step.
Whether you’re outfitting a grand estate or a stylish modern home, the continuous layout ensures that the elegant Versailles pattern flows effortlessly across any space, adding depth, texture, and a touch of French heritage.
Elevate your interior with flooring that tells a story—natural, timeless, and effortlessly elegant.
Technical details
Our engineered Parquet Woodblock has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for a fully bonded installation to a screed or ply subfloor, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.
Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1
Type of finish: Unsealed
Brushed: No
Profile: Grooved all round.
Weight: 9 kg
Recommended Use: Domestic and Light Commercial
Dimensions: 140 × 140 × 15 mm
Width: 140 mm
Length: 140 mm
Thickness: 15 mm
Colour : Light
Under Floor Heating :Yes
Unit Measurement : per Square Metre
Design: 5mm Parquet & chevron, Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
Data sheet
- Species
- oak
- Type
- square
- Structure
- engineered
- Grade
- premier
- Finish
- unsealed
- Shade
- light
- Colour
- natural
- Effect
- none
- Long edge
- square
- Short edge
- square
- Thickness (mm)
- 15
- Width (mm)
- 140
- Length (mm)
- 140
Specific References
Each wood flooring project is different so an individual approach is a must for us. We've created this cost calculator with this in mind and we hope it will be helpful to you in bringing some much-needed clarity.
Please fill in as many fields as possible with the most accurate and available information. This will increase the quality of the end result.





