Oak Board Natural Lacquered Olive 20x210mm

Oak Board Natural Lacquered Olive 20x210mm

Technical details

Product code: OOF/210

Species: Oak

Group: Flooring

Category: Engineered Flooring

Sub-Category: Engineered Pre-Lacquered

Type of finish: Lacquered

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Weight: 14.3 kg

Recommended Use: Domestic and Light Commercial

Dimensions: 210 × 20 mm

Width: 210 mm

Thickness: 20 mm

Colour : Natural

Under Floor Heating : Yes

Unit Measurement : per Square Metre

Design : Wide Boards (150mm – 300mm), Engineered

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.