Oak Chevron Natural Oiled Silver White 15.5x90x450mm: Silver White’s cool, neutral tones combine the beautiful characteristics of wood with an up-to-date and modern twist. Featuring a lightly brushed surface, a subtle silver white oil works with the wood to highlight its distinctive grain patterns.
Oak Chevron Natural Oiled Silver White 15.5x90x450mm
Oak Chevron Natural Oiled Silver White 15.5x90x450mm: Silver White’s cool, neutral tones combine the beautiful characteristics of wood with an up-to-date and modern twist. Featuring a lightly brushed surface, a subtle silver white oil works with the wood to highlight its distinctive grain patterns.
The final appearance combines a tactile and natural touch with a stunning fresh finish.
The engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The unsealed board is supplied with a micro bevel along the length of the board, pre- sanded requiring only a light 100/120 grit sand to finish.
Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.
Product code: OCOS/450
Species: Oak
Group: Flooring
Category: Engineered Flooring
Sub-Category: Parquet Woodblocks
Type of finish: Parquet Woodblocks
Profile: Oiled – An additional coat is recommended.
Specification: Light
Weight: 11 kg
Recommended Use: per Square Metre
Dimensions: 450 × 90 × 15.5 mm
Width: 90 mm
Thickness: 15.5 mm
Length: 450 mm
Colour : Dark
Under Floor Heating : Tongue and Groove
Unit Measurement : Bevelled Edge
Design : Engineered, Parquet & Chevron
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
Each wood flooring project is different so an individual approach is a must for us. We've created this cost calculator with this in mind and we hope it will be helpful to you in bringing some much-needed clarity.
Please fill in as many fields as possible with the most accurate and available information. This will increase the quality of the end result.
Please sign in first.
Sign in
