OSMO Intensive Cleaner

OSMO Intensive Cleaner

OSMO Intensive Cleaner: restoration without sanding. Highly effective, alkaline based concentrated cleaner for the removal of organic and inorganic soiling on interior or exterior surfaces. The ideal alternative to sanding wood surfaces finished with oils and waxes for intensive cleaning and restoration. Osmo Intensive Cleaner does not contain agressive or corrosive alkalis.

Advantages

• Highly effective intensive cleaning
• Restoration of wood surface without sanding
• Easy application
• Ideal for public and commercial use
• Can be used for interior and exterior

PRODUCT DESCRIPTION

Highly effective, lightly alkaline special cleaner for removing interior and exterior organic and inorganic dirt and stains. Ideal for intensively cleaning oiled and waxed surfaces before the actual surface treatment with Osmo wood finishes.

RECOMMENDED USE

Osmo Intensive Cleaner is ideal as an  alternative  to sanding  all  wooden  surfaces  treated  with  oils  and  waxes, e.g. flooring or furniture, and also suitable for cleaning plastics, stainless steel and other waterproof surfaces.

INGREDIENTS
Alkaline  basic  cleaner  (according  to  EC  Regulation  648/2004  on  detergents):  <5%  cationic  tensides;  non-ionic tensides; silicates; complexing agents; NTA and additives.

TECHNICAL DATA
Specific gravity: 1.01-1.03 g/cm³
Odour: faint/mild, after drying odourless pH value (10g/l): 10.9

STORAGE

Up to 2 years and longer if container is kept dry and closed tightly.

SURFACE PREPARATION
Remove loose dirt from the surface with a firm broom or hand broom.
Dilute the concentrate from 1:10 to 1:20 with water. A trial application is absolutely necessary.

METHOD OF APPLICATION
Apply cleaning solution to the dirty surface, loosen dirt and  afterwards  wipe  away  with  clear  water.  For  mechanical processing on flooring, we recommend using a single disc machine (e.g. Osmo FloorXcenter) with a brush ring, red or green pad. Remove dirt with Osmo Micro-Mop Plush or a lint-free cotton cloth. After drying, recoat oiled or waxed surfaces with an appropriate Osmo wood finish, e.g. Osmo Polyx®-Oil.

CLEANING OF TOOLS
With water.

DRYING TIME
Before beginning with surface treatment, allow cleaned surface to dry thoroughly and completely, at least 3-4 hours (normal climatic conditions, 23 °C/50 % rel. humidity).

COVERAGE
1  litre  covers  approx.  30-100  m²  with  one  coat,  depending on the amount of dirt and stains.

*NOTE: Do  not  use  undiluted.  Osmo  Intensive  Cleaner  may  lead  to  discolourations  or  surface  changes  on  unfamiliar  substrates.  Extractive-rich  woods  (especially  Oak) darken when they come in contact with undiluted Intensive Cleaner. Even when diluted, always carry out a  trial  application.  Avoid  allowing  the  solution  to  dry.  Not suitable for everyday cleaning and maintenance.

Hazardous note for the concentrate
Harmful: Xi: irritant. Irritating to eyes and skin.