Oak Board Rustic Lacquered Peaty Brown 20x240mm

Oak Board Rustic Lacquered Peaty Brown 20x240mm

Oak Board Rustic Lacquered Peaty Brown 20x240mm: Discover the bold elegance of our Thruxton Oak Lacquered flooring.
With its deep, rich finish, this oak floor creates striking contrast when paired with lighter walls and furnishings, or it can seamlessly enhance a bold, cohesive design. Known for its versatility, oak absorbs pigment beautifully—making it an ideal choice for pre-sealed floors. Even through the lacquered finish, the wood’s natural texture and distinctive grain remain visible, bringing warmth and character to any space.

Our new Hybrid lacquered flooring is designed to be a highly durable low maintenance finish with a very natural feel and look.
Our engineered wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of birch plywood backing give support to the hardwood top layer, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating which can still be sanded and re-finished after years of use.

Technical details

Our engineered board has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg. Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory lacquered ready to use.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production..

Species: Oak

Type of finish: Lacquered

Brushed: Medium

Profile: Tongue and Groove

Specification: Bevelled Edge

Weight: 14 kg

Recommended Use: Domestic and Light Commercial

Dimensions: 240 × 20 mm

Width: 240 mm

Thickness: 20 mm

Colour : Dark

Under Floor Heating : Yes

Unit Measurement : per Square Metre

Design : 20mm Boards, Engineered

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.