Oak Board Natural Oiled Silver White 15x160mm
Oak Board Natural Oiled Silver White 15x160mm: Silver White’s cool, neutral tones combine the beautiful characteristics of wood with an up-to-date and modern twist. Featuring a lightly brushed surface, a subtle silver white oil works with the wood to highlight its distinctive grain patterns. The final appearance combines a tactile and natural touch with a stunning fresh finish.
Oil finishes penetrate into the wood to protect the timber and in doing so, enhance the grain. This adds depth to the wood’s natural appearance in the process.
Oak is a highly popular species that is a real classic and is suitable for a wide range of finishes and appearances, so that you can achieve the style you want.
This engineered overlay floor can only be laid over an existing subfloor, not as a structural floor. Overlays are made up of a top layer of precious hardwood with a multi-layer ply backing, meaning this floor has the same beautiful appearance of solid wood but is a much more efficient and sustainable use of material.
Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.
Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor.
Product code: OLOS/160
Category: Engineered Overlay
Sub-Category: Engineered Overlay
Type of finish: Engineered Overlay
Brushed: Millrun Grade, contains knots & Colour variation
Profile: Oiled – An additional coat is recommended.
Weight: 11 kg
Recommended Use: per Square Metre
Dimensions: 160 × 15 mm
Width: 160 mm
Thickness: 15 mm
Colour : Dark
Under Floor Heating : Tongue and Groove
Unit Measurement : Bevelled Edge
Design : Wide Boards (150mm – 300mm), Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.