Oak Board Millrun Unsealed 14x210mm
Oak Board Millrun Unsealed 14x210mm: A wide floor enhances the atmosphere of a room, particularly in large spaces, and gives a modern and elegant feel to any project.
Oak Board Millrun Unsealed 14x210mm
A wide floor enhances the atmosphere of a room, particularly in large spaces, and gives a modern and elegant feel to any project.
Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.
Our Engineered overlays have the same beautiful look and feel of solid wood but with a much more efficient use of material. This floor must be laid over an existing subfloor, not as a structural floor. Overlays are made up of a top layer of precious hardwood with a multi-layer ply backing, meaning this floor has the same beautiful appearance of solid wood but is a much more efficient and sustainable use of material.
This product is unsealed, giving you the opportunity to finish it as you like, using an oil to retain the warmer tones and characteristics of the wood, or a lacquer to enhance the wood’s natural hues.
Technical details
Product code: OLOMU/210
Species: Oak
Group: Flooring
Category: Engineered Flooring
Sub-Category: Engineered Overlay
Type of finish: Unsealed
Brushed: No
Profile: Tongue and Groove
Specification: Non-bevelled
Weight: 10 kg
Recommended Use: Light Domestic
Dimensions: 210 × 14 mm
Width: 210 mm
Thickness: 14 mm
Colour : Natural
Under Floor Heating : Yes
Unit Measurement : per Square Metre
Design : Wide Boards (150mm – 300mm), Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.
Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
Data sheet
- Species
- oak
- Type
- board
- Structure
- engineered
- Grade
- millrun
- Finish
- unsealed
- Shade
- medium
- Colour
- natural
- Effect
- flat
- Long edge
- micro bevelled
- Short edge
- square
- Thickness (mm)
- 14
- Width (mm)
- 210
- Length (mm)
- various
Specific References
Each wood flooring project is different so an individual approach is a must for us. We've created this cost calculator with this in mind and we hope it will be helpful to you in bringing some much-needed clarity.
Please fill in as many fields as possible with the most accurate and available information. This will increase the quality of the end result.