Oak Aged Parquet Unsealed 400 x 100 x 19mm: with its tumbled edges and soft worn appearance, our range of aged wood flooring has a convincingly antique look, which looks like it’s developed naturally over the years. The aged parquet looks like it has aged gracefully over the years and has all the character and charm of a reclaimed floor. The advantages of modern manufacturing techniques mean that unlike original solid wood parquet, our engineered aged blocks can be used with underfloor heating.
With this floor, you get all the benefits of a modern floor with the looks, character and charm of a reclaimed floor.
First introduced in France in the 1700s, parquet remains a long-lasting sign of true quality and craftsmanship. It’s been gaining in popularity for years and is now considered to be a true classic. Parquet can be used in any room in the home. It makes a fantastic first impression in hallways, brings an elegant charm to living rooms, and looks stunning in bedrooms. Parquet suits all styles of décor and is completely versatile. In bedrooms, kitchens, living rooms, snugs, bathrooms, and hallways, parquet will always look the part.
There are plenty of fitting options to consider, including the classic and universally adored herringbone pattern, in addition to attractive basket weave and brick designs. It all comes down to a matter of personal preference and the effect you want to create.
Our overlay boards are designed to be laid over a subfloor, whether concrete or an existing wood floor. Once laid, this floor looks and feels the same as all of our beautiful wood flooring but cannot be used as a structural floor.
The engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The unsealed board is supplied with a micro bevel along the length of the board, pre- sanded requiring only a light 100/120 grit sand to finish.
Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.
Type of Finish: Unseald
Profile: Tongue and Groove
Specification: Square End
Unit Weight: 13.5kg
Pack size: 1.6 m²
Size: 400 x 100 x 19 mm
Width: 100 mm
Thickness: 19 mm
Suitable for underfloor heating: Yes
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.